Product Description

  This product is a cold vulcanized rubber repair agent, synthesized from a two-component polymer material and cured at room temperature into an elastic rubber body. It has high bonding strength with rubber, canvas, metal, etc., and has good wear resistance, corrosion resistance, excellent toughness, and impact resistance. Suitable for repairing interface seams, holes, burrs, and longitudinal tears of various rubber conveyor belts. It can also be used for repairing and pre protective coatings of cables, rubber liners, rubber rollers, impellers, material troughs, etcnbsp;
nine hundred
  Adhesive method

  Surface treatment: Use an angle grinder or wire wheel to roughen the repaired area and its surroundings, and remove any debris. If repairing belt holes or longitudinal tears, a groove needs to be cut, and the back of the adhesive leakage area should be adhered with tape< br />
  Cleaning primer: Brush the surface to be repaired with HY988 special primer and let it dry; Heat it up to 75 degrees with a hot air blower and pour in the mixed repair agent< br />
  Glue repair: Mix components A and B in one go (or follow A: B=3: Mix thoroughly for 1-2 minutes at a ratio of 1; Mix it completely, then pour it into the heated area to be repaired or brush it onto the pre protected area, and smooth it out. The prepared adhesive should be used up within 5 minutes. Curing: At 25 ℃, it will become elastic in 3-4 hours and can be turned on for usenbsp;
nine hundred and one
  Precautions

  Keep the container sealed before mixing, and once opened, use it up as soon as possible. The prepared repair agent should be used up within 5 minutes. Sealed and stored in a cool and dry place, with a shelf life of one year


  Packaging specifications

  300g of component A, 100g of component B, and 50g of primer; 10 sets/box


  Declaration

  The technical parameters mentioned in this article are typical values and are not used as product acceptance criteria. They are for reference only. The above data was obtained under standard laboratory conditions, and our company guarantees its reliability. However, due to different working conditions used by users, different surface states of materials, and different curing conditions, some changes in actual performance data are normal phenomena. Storage conditions, transportation, and other factors can all affect the stability, physical and mechanical properties of the adhesive. We are not responsible for any results obtained by anyone using methods beyond our control. It is recommended that users conduct experiments based on the data provided in this article before formal use.